High quality Welding masks store UK in 2023 by WeldingSuppliesDirect: It is a step-down transformer that converts high voltage, low-amperage AC input current into low voltage, high-amperage AC welding current. The transformer welding machine can run on single-phase power. Most of the AC power is created, and each time the polarity changes, the voltage passes through zero, making an unstable arc state. However, this problem has been solved by designing better compressive characteristics in the welder and better AC electrodes. MIG welding machines are commonly used for welding stainless steel, steel, and aluminum alloys. Stick welding machines work well with stainless steel, steel, and cast iron. TIG welders are a better choice for all metals or alloys except cast iron.
Although this is a regular drill press and not a magnetic drill press, you can also use this one for steel drilling. The motor has a rating of ½ HP and in order to change the drill speed for metal drilling, you have to change the belt and pulley combination setting to the slowest speed. As a drill press, the RIKON 30-120 does not have the best performance. The feeding wheel is not well made and is awkwardly situated. Your chances of getting the back of your fingers caught between the feeding wheel and the belt tensioner are quite high and it is very painful. The packaging of this drill press is poor as well. If you are looking for a tool that you can use for drilling steel exclusively, we recommend that you stick to magnetic drill presses. Regular drill presses can work great for wood, plastics, and steel, but they don’t have magnets and is impossible to use for vertical and overhead applications.
Welding Supplies Direct stock a wide range of mag drills from industry leading manufacturers such as JEI Solutions, Alfra, Rix Tools, FEIN & Holemaker Technology. Our flagship mag drill partner, JEI Solutions, have a range that is suitable for every drilling / broaching application; be it low profile applications, on-site cutting for structural jobs or simple at home, DIY drilling. The HMT VersaDrive V35 is a British made 35MM mag drill that is available in both 110V & 230V input voltages. It has a 35MM maximum cut capacity with a 110MM maximum cutter length and is perfect for all drilling applications, especially structural steelworks. Read more info on https://www.weldingsuppliesdirect.co.uk/metal-working-tools/mag-drills.html.
Never drag, roll, or drop cylinders during the use. Always take care to maintain the valve caps during the transport. Avoid lifting the cylinder using a valve cap. Never store the cylinders for a long time period. Gas cylinders should only be purchased in small quantities. Never store them for long time periods. It is important to follow extreme precautions and safety measures while working with industrial gas cylinders due to several hazards and risks posed by them. Sourcing these cylinders from a reliable manufacturer is the most important safety measure for any facility owner using these cylinders.
If you’re looking for a reliable cutting disc that can handle a variety of materials, this tool is a great option. This 10-pack of disc grinder cutting wheels is perfect for cutting metal and stainless steel surfaces. With thin metal cutting discs, you can easily get into tight spaces, and they are durable enough to handle even the toughest jobs. Whether you’re a professional contractor or a DIY enthusiast, these disc grinder cutting wheels are sure to come in handy. It’s made of durable aluminum oxide grains that provide an aggressive cutting action and longer service life. Due to the reinforced double fiberglass mesh, this disc meets the MPA en12413 standard. The Panlen Metal&Stainless Steel Cut-Off Disc for Angle Grinder is the perfect accessory for anyone with a 4.5 inch disc grinder. With this size, the cutting discs reach up to 13,000 RPM and 80M/S speeds. You can cut carbon steel, pipe, iron, copper and all other ferrous metals. It is made from tough abrasive materials, this disc can easily take on even the most challenging projects.
The Hobart Handler 140 is a bit of a hybrid between pro-level performance and homeowner convenience. The 140-amp rating is enough to weld up to 1/4-inch steel. This machine works both as a flux core welder and as a MIG. The duty cycle is 20 percent at 90 amps. That’s enough power to do most jobs you’ll ever tackle in a home shop setting, but for professionals working on heavy stuff like trailer frames or pipe fencing, it’s just not going to be enough. For other professional work like auto body or welding brackets, mountings and the like, this machine can run off a 4000-watt generator. It’s small enough to carry into a home for HVAC repair and the 110/115/120 input means you could use a small generator or the household receptacle to do the work. The solid aluminum wire drive accommodates either 4 or 8-inch spools and it’s selectable between multiple gauges of wire. The Hobart Handler 140 is backed by a 3-year warranty and its professional features and true MIG capability make it the our Pro Value Pick in this review roundup.
One of the “cardinal sins” that almost every shop commits is over-welding. This means that if the drawing calls for a 1/4″ fillet weld, most shops will put down a 5/16″ weld. The reasons? Either they don’t have a fillet gauge and are not exactly sure of the size of the weld they are producing or they put in some extra to “cover” themselves and make sure there is enough weld metal in place. But, over-welding leads to tremendous consumable waste. Let’s look again at our example. For a 1/4″ fillet weld, the typical operator will use .129 lbs. per foot of weld metal. The 5/16″ weld requires .201 lbs. per foot of weld metal – a 56 percent increase in weld volume compared to what is really needed. Plus, you must take into account the additional labor necessary to put down a larger weld. Not only is the company paying for extra, wasted consumable material, a weld with more weld metal is more likely to have warpage and distortion because of the added heat input. It is recommended that every operator be given a fillet gauge to accurately produce the weld specified – and nothing more. In addition, changes in wire diameter may be used to eliminate over-welding.
How to pick a welder tips: Digital meters factory fitted: Great to have when you purchase and may be required for calibration requirements. To fit them down the line could be expensive. Drive rollers: Metal rollers are the best. Nylon & plastic ones will always wear away quicker. Drive block system: Four roll would always be first choice, but some of the lower amperage machines won’t have them & two roll therefore would be acceptable. Bottle trolley: If you want a stepped voltage machine to be portable, you’ll need one. If you have a full size industrial cylinder check that the running gear & cylinder rack are man enough.
Power tool pioneers Bosch have been in the game since 1886. They certainly know a thing or two about making one of the best corded angle grinders on the market. I was amazed at the power output and precision you can achieve with the GWS 7-115 angle grinder. Starting off with the look and feel of this grinder, it’s surprisingly slimline and lightweight. It’s certainly easy to hold on to and weighs less than 2 kg. Bosch have made use of a clever 20° angle side handle as well for ultimate precision grinding. Making use of one of Bosch’s brilliant 720 Watt Champion motors, you know this is a tool that’s built to last. Everything is chunky and built for hard work. They’ve included a two-stage safety switch to avoid accidental starts, which is essential for any tool like this. The motor spins a 115 mm cutting disc up to an impressive 11,000 rpm. There’s a relatively low amount of vibration when in use as well. Just 6.5 m/s², which isn’t bad at all for corded grinders. I like the fact that Bosch have flattened the gear head. This reduces the overall size and makes it easy to get into tight spots. If you’re looking for one of the best angle grinders from one of the top names in the business, this is a great choice.
A few advices about welding equipment, MIG and TIG welders, plasma cutters. TIG Welding / Gas Tungsten Arc Welding (GTAW) — TIG welding is an arc welding process that uses a non-consumable tungsten electrode to produce the weld. The weld area is protected from atmospheric contamination by a shielding gas (usually argon) and a filler metal, though some welds, known as autogenous welds, do not require it. A constant-current welding power supply produces energy that is conducted across the arc through a column of highly ionized gas and metal vapors known as plasma. TIG welding is most commonly used to weld thin sections of alloy steel, stainless steel and nonferrous metals such as aluminum, magnesium and copper alloys. The process grants the operator greater control over the weld than other welding processes, allowing for strong, high-quality welds. TIG welding is comparatively more complex and difficult to master than other processes and is significantly slower.
120V Input Power and 155 CFM Airflow. The machine requires 120V input power to generate 155 CFM airflow. You can adjust the airflow from 20 different settings as you need. It can provide support to 2 other operators at a time if you just install a second arm. 3-stage Filter and Suitable for Benchtop Soldering. The machine can be operated with a remote wirelessly, which makes it extremely useful. The 3-stage filter comes with Carbon, HEPA, and pre-filter, which I found to be effective for any welding work. At 50% motor speed, it generates 53 dBA sounds and produces only 63 dBA sounds at 100% motor speed. PACE Arm-Evac 150 can be used for any sort of benchtop soldering, industrial solvents, and lasers. It’s the best portable weld fume extractor for medium-level welding tasks.
The story of ESAB is the story of welding. When our founder Oscar Kjellberg developed the world’s first coated welding electrode in 1904, he launched a company whose innovation and uncompromising standards have helped create the history of welding itself. For more than 100 years, ESAB has been powered by the will to continuously seek new and improved ways of serving our customers. This has made ESAB a world leader in welding products and advanced cutting systems. In 2012, ESAB was acquired by Colfax Corporation, one of the world’s leading diversified industrial manufacturing companies. Colfax, like ESAB, is a solidly customer-focused company that places strong emphasis on constant innovation and improvement. From the firsts by our founder to our global growth, we take pride in what we’ve accomplished in more than a century. But we do so with a keen eye on the future. What can we do better? It’s only when we seek to build upon all we’ve learned, to perfect the innovations our customers count on to work confidently, and push ourselves and our company further that we can boldly face the future. This is how we continue to write the history of welding and cutting. At the end of the day, it’s not where you’ve been that matters most – it’s where you’re going. And for us, that’s forward.
Welding Supplies Direct are the UK distributor for GPPH welding tables, manufactured to the highest standards in Europe. GPPH’s range of welding benches and tables are laser cut for precision and are used in every branch of industry. These welding tables offer perfect flatness (+/- 0.5MM) & are made from 15MM thick S355J2+N grade steel. Our modular welding benches come equipped with a hole system of all sides (tabletop & all sides); the holes are 28MM in diameter and have a chamfered edge for easy tool assembly. You have the option of standard legs or castors being fitted, too.
United Kingdom market dive: Forney Industries is an American company that was founded in 1932. Forney’s 309 140 is affordable and able to weld many metals. As you’ll see below, its duty cycle is hardier than most, so you can work for much longer without breaks. It is about the same price is the Hobart 500559 Handler 140, but you’ll that the Forney is less suitable for any heavy-duty welding projects you might want to commit to. Therefore, the Forney is ideal for household use, provided that the use isn’t too demanding. It welds up to ¼ inches and includes flux core. It is capable of welding mild steel, stainless steel, aluminum, and cast iron. The Forney is able to use 4 inch and 8 inch wire spools. The cast aluminum wire feeding system ensures that the wire won’t tangle as much while it’s fed through.
If you’re a beginner welder but don’t mind splashing the cash for a top of the range welder, then try the Millermatic 141. Miller have really pushed the boundaries of usability with this welder and it features an auto-set feature for an easy set up, and infinite voltage and wire speed control. All you have to do is select the thickness of the metal you’re welding and you’re ready to start welding straight away. If you open up the machine you can tell that all the parts are great quality and really durable as well. There are more powerful welders on the market for the price, but there’s nothing better for welding up to 3/16 inch steel. See the full review here.
Finally, if you’re looking for a home welder, then you don’t necessarily need the most powerful machine on the market. Some people invest in MIG welders specifically to support their home-based projects, when they’re creating something new in the garage, or working on adaptions to pieces of machinery and furniture. The Clarke MIG151EN is designed for the DIYers who can’t afford to compromise on quality. Complete with professional specifications like a non-live torch and an extra-tough protective coating on the front and rear, the Clarke turbo MIG welding machine comes with everything you need to start welding at home. There’s a thermal overload protection system to give you complete peace of mind, as well as a very powerful wire drive motor included. Additionally, you’ll be pleased to know that all Clarke products comply with the highest quality of European and safety standards. As a winner of multiple third-party awards, Clarke offers a high-performance option for anyone searching for an arc welder for home use. The rotary power selection system also means that you can choose the level of performance you need with ease. Discover additional details on https://www.weldingsuppliesdirect.co.uk/.
If you are a real handyman, you might have done some metal works, not to mention joining and installation. Yet, if you have some experience and you are ready to pick up the gauntlet of repairing metal gates or welding a pedal to a bicycle, a MIG welder is what you need! A few welding methods are known such as MMA, TIG, MIG, and MAG. We will look through MIG welders in our review. A MIG welder uses a streaming inert gas that acts as a shield and expels air contaminants from a weld zone. If no gas is used, the seam is porous and infirm. We will review household MIG welders plugged to a power outlet. Such welders can fuse stainless steel sheets and weld cracks and holes on cars, etc. We have examined 5 best MIG welders to help you buy an appropriate model for your welding needs. Also, we advise paying attention to sandblasts and that will help you get the surface prepared before welding, as well as angle grinders for cutting metalware.
