Led flood lights manufacturer with Chz-Lighting: Using aluminum provides lightweight, corrosion-resistant, versatile, heat-conductive, and recyclable designs for LED roadway light cases. A high-end LED roadway light will have a UV and water-resistive coating to improve longevity. The street light pole mount can be 60-76mm in diameter. The street light LED assembly must clamp onto the pole firmly. Manufacturers produce yoke, side entry, shoe, top entry, and suspended mounting mechanisms. These can be either aluminum or iron, depending on the design. In the case of iron, the mount can catch rust in high humidity and UV conditions. Aluminum is still the preferred mounting material for LED streetlights. See additional details on led street light fixture.
Generally, more watts mean more light but with a higher electrical consumption. A vast area will require floodlight with more lumens. For example, a sports venue may need up to multiple decades of lumens, whereas a house’s backyard may need only 1,000 lumens. Color temperature – It defines the color of light emitted from a light source. It is measured in Kelvins (K). High color temperatures up to 5000-6000K give cooler bluish-white light, whereas lower temperatures (~3,000K) represent a warm yellowish light source. Here are some of the floodlight color temperatures: Warm White (2700K-3000K), Neutral White (3500K-4000K), Cool White (4500K-5000K), Daylight (5500K-6500K).
Flip Chip COB – Flip-chip is the next step in LED manufacturing. There is no wire bonding step, which results in better illumination, as the semiconductors require less space and can have denser formations. Since there are no wires, there is a lower blockage, leading to a further increase in illumination. Typically, high-end street LEDs will feature a flip-chip COB. Driver on Board (DOB) – It is a less common design opted by LED manufacturers as it increases the heat load in one area. LEDs require power to light up. The circuit that powers them is called the driver. Some designs with compactness or low-power applications can have DOB LED designs. The driver is beside the set of LEDs mounted on the same substrate. It is better to have a driver in a separate compartment to improve heat transfer capabilities and avoid damage to components in high heat and harsh environments.
The LED tube uses a light-emitting diode as a light source, which has higher luminous efficiency, is more energy-saving, has a longer service life, and is more environmentally friendly. It is the ideal product to replace fluorescent tubes at this stage. The LED tube and the traditional fluorescent lamp are the same in the outer size. There are T5 tube, T8 tube and T10 tube. The length is 0.6m, 0.9m, 1.2m, 1.5m, 1.8m, 2.4m. The installation of the LED tube is very simple. When installing, the original fluorescent lamp is removed and replaced with the LED tube, and the ballast and the starter are removed, so that the 220V AC mains can be directly applied to the ends of the LED tube.
Our LED light fixture can be divided into indoor LED lighting and outdoor LED lighting according to the place where LED lamps are used. Indoor lighting requires high brightness, good color consistency, high color rendering, and high versatility. Outdoor lighting requires high brightness, long life, and good resistance to harsh environments. Our LED lamps feature high luminous efficiency, low energy consumption, long life, safety, and environmental protection. They can operate for more than 50,000 hours without failure, widely used in factories, warehouses, shopping malls, roads and other public places that require long-term lighting.
LED garden lights are a kind of outdoor lighting. It uses a new type of LED semiconductor as the illuminant. It usually refers to the outdoor lighting that illuminates an area less than 6 square meters. Its main components include an LED light source, enclosure, pole, and flange. The disc and the basic embedded parts are composed of 5 parts. It is mainly used to light up large-area mines, building outlines, stadiums, overpasses, monuments, parks, and flower beds. In fact, almost all large-area lighting fixtures used outdoors can be regarded as spotlights. Applicable occasions: Suitable for shopping malls, exhibition halls, parking lots, playgrounds, gyms, parks, building facade and public corridor, stair corridor and other indoor and outdoor lighting.
Solar Street Lighting Advantages: No need to lay cables, no AC power supply, no electricity charges; DC power supply, light-sensitive control; good stability, long life, high luminous efficiency, easy installation and maintenance, high safety performance, energy-saving, economical and practical. Solar Powered Street Lights are widely used in urban main and secondary roads, residential areas, factories, tourist attractions, parking lots and other places. Find additional info at https://www.chz-lighting.com/.
At present, there are two types of LED street light sources on the market: module type and integrated type.Street lights that use modular light sources, we usually call them modular led street lights, and those that use integrated light sources, we call them integrated led street lights. The price of integrated led street lights is cheaper than the price of modular led street lights, but modular led street light is still very popular. What are the reasons? The module LED street lamp has good heat dissipation performance and long service life.
The waterproof problem of the lamp: How should the lamp holder be waterproof? Many street lamp manufacturers take this into consideration when they produce LED street lamp caps. Most street lamp caps are waterproof. Not only that, many led outdoor street lights have protection grades of IP65 or IP66, which can completely prevent dust from intruding, and will not seep in rainstorms, and are not afraid of bad weather. However, it cannot be generalized. The waterproof performance of LED street lights also depends on the manufacturing capacity and level of street lamp manufacturers. Large manufacturers can be more trustworthy, but small workshops may not be able to guarantee the quality. It is recommended to confirm the test report of the product before purchasing.
The indoor table tennis room originally used 36 1000W lighting light boxes, the glare was serious and unevenly distributed, and the field illumination was less than 100lx, which was not conducive to the development of table tennis. In order to ensure the professionalism of table tennis lighting,CHZ-LIGHTING uses 124 36W professional anti-glare LED panel lights, which are made of special water chestnut plates, UGR<19, and are reasonably arranged above the venue. After testing, the average illuminance of the venue is above 300lx, the uniformity is above 0.6, the light is soft and bright, and there is no glare interference. The healthy eye-protecting light makes the eyes more comfortable.
